.jpg)
Wechat
Trouble shooting of switch automatic assembling machine and non-standard automatic assembling machine
Time:2018-01-01
Views:1428
The switch auto-assembler and non-standard auto-assembler are trouble-shooting. The switch auto-assembler produced by Ericsson auto-assembler generally adopts the structure of turntable, which has the characteristics of fast speed and stable performance. The following is the machine in the operation of the possible occurrence of some of the faults and causes of the corresponding countermeasures, for the reference of users, if there is a failure can not be removed please contact the company. 1: Automatic Switch Assembler can not be started or stopped in operation. Reasons and countermeasures: 1) check current input (220V) and 6KG air pressure. 2) check whether the set quantity and quantity has arrived, if it has arrived, please clear the zero before starting. 3) check for materials and defects in the QC controller. 2: Switch auto-assembler alarm indicates that a work station is not in place. Reasons and countermeasures: 1) check whether the work station is stuck, the card clearance 2) automatic mode switch to manual mode, into the manual page 3) manual actuation of the position of the cylinder, whether the normal operation of the cylinder. If the cylinder can not operate normally, then check the control loop, PLC output point whether there is output, whether the solenoid valve can be absorbed. 4) click on the pneumatic cylinder and adjust the position of the in-place and in-place sensors until normal induction is achieved. ·
.jpg)
Wechat